How to Replace the LCD Lens on a Sidekick LX 2009
Is the front screen on your sidekick 2009 cracked? Did you drop your Sidekick 2009 and the glass in front of the LCD screen broke, shattered or cracked? Is the Lens of your Sidekick LX 2009 really scratched?
Well, then this guide is for you. Following the steps below, you will be able to replace the LCD lens by yourself for a grand total of about 15 dollars after parts and tools. Find a new lens by clicking on the following link: Sidekick 2009 Replacement Lens
Sound good? Then read the Sidekick 2009 LCD Lens Replacement guide below.
Tools Needed: size 000 Philips screwdriver, T6 Torx Driver, and small plastic pry device. I recommend a guitar pick but a credit card or something similar will also work. If you need a Torx driver or the size 000 Philips, I suggest checking out your local hardware store. I found mine at Home Depot.
- Power Down Sidekick 2009
- Remove Battery Cover and Battery

- Remove small #000 Philips screw in battery compartment for LCD assembly

- Flip Sidekick LX LCD screen to half position

- Remove the 2 T6 Torx Screws holding the Flip assembly to phone base

- Gently lift LCD assembly from base of the sidekick

- Set phone base to the side
- Place LCD assembly screen down on a soft surface to prevent scratching
- Remove 4 #000 size Philips screws from top of back cover

- Remove 4 #000 size Philips screws from bottom of back cover. You will need to move the flip assembly down to access 2 of the screws

- Use the guitar pick or pry tool to gently release the back cover. Start in the corner and work around the cover

- Gently slide the back cover up and away from flip assembly to remove

- You will now see the backside of the LCD screen

- Gently lift the end nearest the flip assembly up and pull LCD screen out.

- You will now have just the front lens and frame

- Press down on the corner of the frame to separate the lens and the frame. It is held down by double sided tape.

- Work the pry tool around the edge to release the lens from the frame.

- Remove all remaining tape residue.
- Make sure new lens is lined up properly before installing. The small grey piece on the back should be cover by a tab on the frame.

- Install double sided tape onto frame.
- Install lens into frame and press down all around the edges to seal the lens to the frame.
- Set the frame lens side down on a soft surface to avoid scratching
- Clean back side of lens
- Install LCD screen into frame

- Make sure the 3 magnets are still in place before installing back LCD cover
- Install back cover

- Press around the outside edges of covers to make sure they are snapped together
- Install 4 bottom cover screws
- Install 4 top cover screws
- Inspect the Copper contacts pictured below for proper seating and debris free

- Install LCD assembly back on the base of the Sidekick 2009
- Install two T6 Torx screws

- Flip sidekick LX 2009 over and install small screw in battery compartment

- Install battery
- Install battery cover
- Power on and make sure the LCD screen comes on.
Originally posted 2009-09-16 20:42:51.
Related posts:
- How to Replace the Sidekick LX Faceplate and LCD Lens Is your Sidekick LX LCD lens frame cracked? Don’t like...
- Replace the Sidekick 3 LCD Lens Cover Is the Lens on you Sidekick 3 cracked? Too many...
- How to Replace Sidekick 2008 LCD Assembly Did your Sidekick 2008 LCD screen get cracked? Backlight burned...
- How to Replace a Sidekick 3 Screen Sidekick 3 Screen Replacement Replacing the LCD assembly flip screen...
- Fix a White LCD Screen on Your Sidekick Fix White LCD Screen on Sidekicks The LCD screens on...
